CNET CWR-854 - Manual (Page 33)

33
3.3.4 Access Control
Access Control allows user to block or allow wireless clients to access this router. Users can select
the access control mode, then add a new MAC address with a simple comment and click on
“Apply Changes” to save the new addition. To delete a MAC address, select its corresponding
checkbox under the Select column and click on “Delete Selected” button.
 Wireless Access Control Mode: There are three types of access control options:

Disable
 Allow Listed: When selected, only clients whose wireless MAC addresses
are in the access control list will be able to connect to the Wireless-G Router.
 Deny Listed: When selected, wireless clients on the list are blocked from
accessing the Wireless-G Router.
 MAC Address: This field is used to enter the client’s MAC address.
 Comment: This field is used for adding any comments.
 Apply Changes : This button is used to apply new settings.
 Delete Selected : This button is used to delete a selected client.
 Delete All: To delete all clients in the Current Access Control List.
 Reset: To undo all changes.