Uniden UH-100 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2 . Group Scan (GS) Mode
Allows you to monitor a Priority Channel while scanning.
To use GS Mode Scanning, press the OS / GS key,
GS icon appears on the display. OS Mode is indicated
by the absence of the GS icon.
GS Scanning checks the Priority channel activity
regularly.
If the Priority channel becomes active the radio will stay
on that channel for as long as the signal is present. If
the received signal ceases, Priority scanning continues
after 3 seconds.
If scanning stops on a channel which is not a Priority
Channel, UH-100 will continue monitoring the Priority
Channel for activity while listening to the active one.
eg. CH40 becomes active.
To deactivate SCAN, press the SCN key or the PIT Switch.
Note: //SCAN is deaci/Vafed whi/e it is tuned at an active channel, the UH-lOO will
stay on that active channel. If none of the channels are active, the
UH-100 will reinstate the Priority channel.
if GS Scanning is initiated when there are no channels programmed in GS
memory, an error tone will be heard and scanning will not start.
14