Receiving calls when in quiet mode, Activating the tone squelch (receiver quieting) – Uniden UH-100 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1. Select the channel you want to put into quiet mode using the channel selector
switches.
Activating the Tone Squelch (Receiver Quieting)
2. Press the SCRAMBLE/TSQ button for about 1.5 seconds. One beep is heard and
the TSQ indicator appears on the display. This channel is now programmed to
operate in Quiet Mode.
MEM
TSO ^
T7e.6Si)i«. t tJ
When a quiet mode channel is selected the TSQ indicator appears on the display. The
microphone PTT is disabled on that channel until a signal with your Selcall ID is received.
All other channels can be used as normal.
3. To deactivate any channel in quiet mode first select the relevant channel.
Press the SCRAMBLE/TSQ button for about 1.5 seconds. Two beeps are heard
and the TSQ indicator disappears from the display.
Receiving Calls when in Quiet Mode
The UH-100 will respond in the same way in quiet mode as when it is called while in
normal mode.
When the call is left unanswered, however, the radio automatically resumes the quiet
condition. {The auto - quiet mode function can be switched ON or OFF, please refer to
the Selcall Advance Programming section on page 32)
30