Tone squelch scanning – Uniden UH-100 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
You may wish to limit your scanning activities so the UH-100 will only scan the channels
you have pre-arranged to use with your SELCALL family. These are the channels you
have programmed as TSQ or quiet mode.
Tone Squelch Scanning
Tone Squelch Scanning applies this function.
To activate this feature firstly initiate SCAN.
Then press SCRAMBLE/TSQ
When a call is received the unitwill pause scanning and an audible alarm is emitted.
If left unanswered the radio wilt resume Tone Squelch scanning. The UH-100 can be
programmed to deactivate scan automatically when a selective call is received. Please
refer to the Selcall Advance Programming Section.
To deactivate Tone Squelch Scanning, simply press SCN key.
31