10 selcall id memory – Uniden UH-100 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
10 Selcall ID Memory
The UH-100 has a special 10 memory location, which stores the Seical) identification
{ID) codes of users in your group. This section tells you how to program the Selcall ID
memory.
Press and release the TONE CALL switch on the microphone.
¿WW\\H\\\WWWU\\V
The last used Selcall ID will be displayed,
(If you have never used the Selcall feature
00000 will appear.)
_ r
oaooa
Use the channel A and ▼ buttons to select the Transmit Selcall Memory location number.
Press the MEM switch on the UH-100
and the last digit of the Selcall ID will
flash. This indicates that you can now
start to enter the Transmit Selcall ID
code.
The flashing digit is the one you can program.
To select the digit you wish to change use the < (SCRAMBLE or ► / DUPLEX to move
the position.
'■-----------
n
QQ^SS'U
u
23