Lead - in delay programming, Jl u – Uniden UH-100 User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Lead - In Delay Programming
Lead-in Delay is a SELCALL transmission parameter that "wakes-up" and helps the
receiver of the other radio to lock onto the incoming signal. Each time a SELCALL ID
is transmitted, the Lead-in Delay attaches itself to the beginning of the code sequence
and causes the transmitter to be on for a longer period prior to the code transmission.
This makes for a stronger communication link between the transmitter and the other
receiver.
The major advantage of having the Lead-in Delay longer is when selectively catling
another radio via a repeater station. A long Lead-in Delay helps to stabilize both the
communication link from your radio to the repeater station and from the repeater
station to the other radio.
To change the Lead - In Delay setting.
From the main menu, using the
a
or ▼ key, go to the Lead - in Delay Programming
Menu. (If you have never changed the Lead - In delay duration, the default setting is
500 mSec)
Press the MEM key to start programming. The Lead In Delay on display will flash. This
indicates that you can now change the setting.
J
L U
a
36