Operation, Setting the squelch – Uniden UH-100 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operation
Setting the Squelch
1. To turn the unit ON, rotate VOLUME clockwise.
Adjust volume to a comfortable level.
vn.
-
9
-
ao
Note: You must select a channel which is not in use before setting the SQUELCH
control on your radio.
2. Think of the Squelch control as a gate. If you turn SQUELCH fuliy clockwise it
raises the "Squelch Gate" so high that no signals get through.
Strong Signals -
Mediu^n Signals-
Weak Signals -
Notse -
3. If you turn the SQUELCH fully counterclockwise it lowers the "Squelch Gate" so
that everything gets through - noise, weak signais, and strong signals.
VOL
-
9
-
so
m.
Strong Signals^
Medium Signals -
Weak Signals -
Noisa-