Uniden UH-100 User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
From the main menu, using the
a
or
y
key, go to the Alarm Mode Programming Menu.
{If you have never changed the Alarm setting, the default setting is Auto)
Press the MEM key to start programming. The Alarm setting on display will flash. This
indicates that you can now change the setting.
To change the Alarm Mode setting.
To change, use the
a
or ▼ key.
When completed, press the MEM key. The new Alarm setting stops flashing and will be
stored in the radio memory.
To return to normal operation, press and hold the OS/GS key for about 1.5 seconds,
or press either the
a
or
t
key to go to the next programmable parameter.
40