Kenwood TH-27A - Manual (Page 12)

■ NOT DISPLAYED FUNCTION
• Press the M key , then the key below. • Press the F key for longer than 1 second, then the key
below.
Key Function Refer to
M, CALL
Displayed data in call
channel.
P.21 4-4-5
M, MONI
DTMF memory entry
mode.
P.31 4-7
M, ENT
Clear the displayed
memory channel data. P.21 4-4-5
• Press the M key for longer than 1 second, then the key
below.
Key Function Refer to
M1Sec,4
Enter the upper limit
frequency of
programmable scan 1
P.24 4-5-4
M1Sec,5
Enter the upper limit
frequency of
programmable scan 2
P.24 4-5-4
M1Sec,7
Enter the lower limit
frequency of
programmable scan 1
P.24 4-5-4
MISec, 8
Enter the lower limit
frequency of
programmable scan 2
P.24 4-5-4
Key Function Referto
FISec, MONI
Recall the DTMF
memory
P.32 4-7
FI Sec, DTSS DTSS Code Selection
P.33 4-8-2
FISec, LOW
Battery Saver function
on or off
P.42 4-11
FISec, 1
Audio confirmation
BEEP on or off
P.15 4-2
FI Sec, 3
Tone Alert sound ( Pi
Pi Pi or Pul Pul Pul)
P.41 4-10
F1Sec,4
Displays the upper
limit frequency of the
programmable scan 1
P.24 4-5-4
FISec, 5
Displays the upper
limit frequency of the
programmable scan 2 P.24 4-5-4
F1Sec,7
Displays the lower
limit frequency of the
programmable scan 1 P.24 4-5-4
12