4-5. memory entry, Luc c n – Kenwood TH-27A User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Channel
Normal
channel
Split
channel
RX frequency
O
O
TX frequency
NA
O
Tone(CTCSS) frequency
Tone (CTCSS) status
o
o
Frequency step
o
o
Shift status, REV on/off
o
NA
DTS5 code, DTSS status
o
o
4-4-5. Memory Entry
• Normal channel entry or Odd split channel RX fre
quency entry
1. Select the desired receiver frequency, tone informa
tion etc.
2. Press the M key momentarily. The — indicator will
light in the memory channel display.
CO
CO
CO
lUC c n
B
APO
3. Select any memory channel (00 ~ 39) using the
numeric keys.
To enter data in memory, a 2-digit number is used.
Memory channel number will turn off. This indicates that
the receiver data has been properly stored in memory.
• TX frequency entry (Split memory channel only)
1. Press the ENT key and numeric keys to select the
desired transmitter frequency.
2. Press the M key momentarily. The — indicator will
light on the memory channel display.
3. Press and hold the PTT switch and select the memory
channel (00 ~ 39) using the numeric keys.
NOTE
When recall the nothing is stored memory a error
sound will be heard .
4. The radio return to the previous mode.
20