Reset, Voice command – Chrysler 2015 Country - Owner Manual User Manual

Page 174

Advertising
background image

• Push the Voice Command

button and say the

“Voice Training,” “System Training,” or “Start Voice

Training” command.

You can either push the Uconnect® Phone button to

restore the factory setting or repeat the words and

phrases when prompted by the Uconnect® Phone. For

best results, the Voice Training session should be com-

pleted when the vehicle is parked with the engine

running, all windows closed, and the blower fan

switched off.
This procedure may be repeated with a new user. The

system will adapt to the last trained voice only.
Reset
To Reset all settings using Voice Command:
1. Push the Phone

button.

2. After the “Ready” prompt and the following beep, say

“Setup,” then “Reset.”

• This will delete all phone pairing, phone book en-

tries, and other settings in all language modes. The

System will prompt you before resetting to factory

settings.

Voice Command
For best performance:

• Adjust the rearview mirror to provide at least ½ inch

(1 cm) gap between the overhead console (if equipped)

and the mirror.

• Always wait for the beep before speaking.
• Speak normally without pausing, just as you would

speak to a person sitting a few feet/meters away from

you.

172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising
This manual is related to the following products: