Programming additional transmitters, Transmitter battery replacement – Chrysler 2015 Country - Owner Manual User Manual

Page 30

Advertising
background image

2. Push and hold the UNLOCK button on a programmed

RKE transmitter for at least 4 seconds, but no longer

than 10 seconds. Then, Push and hold the LOCK

button while still holding the UNLOCK button.

3. Release both buttons at the same time.
4. Test the feature while outside of the vehicle by Push-

ing the LOCK/UNLOCK buttons on the RKE trans-

mitter with the ignition switch in the OFF position and

the Key Fob removed.

5. Repeat these steps if you want to return this feature to

its previous setting.

NOTE:

Pushing the LOCK button on the RKE transmit-

ter while you are in the vehicle will activate the Vehicle

Security Alarm. Opening a door with the Vehicle Security

Alarm activated will cause the alarm to sound. Push the

UNLOCK button to deactivate the Vehicle Security

Alarm.

Programming Additional Transmitters

If you do not have a programmed RKE transmitter,

contact your authorized dealer for details.

Transmitter Battery Replacement

The recommended replacement battery is one CR2032

battery.
NOTE:

• Perchlorate Material — special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

• Do not touch the battery terminals that are on the back

housing or the printed circuit board.

28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising
This manual is related to the following products: