To turn off the engine while in remote start mode, When to reset remote start – Chrysler 2015 Country - Owner Manual User Manual

Page 37

Advertising
background image

• Any engine warning lights come on.
• Fuel lamp turns on.
• The hood is opened.
• The hazard switch is pressed.
• The shift lever is moved out of PARK.
• The brake pedal is pressed.
• The engine is allowed to run for the entire 15-minute

cycle.

To Turn Off The Engine While In Remote Start
Mode
Press and release the REMOTE START button one time or

allow the engine to run for the entire 15 minute cycle.

NOTE:

To avoid unintentional shutdowns while in the

Remote Start Mode, the system will not allow the Remote

Start button to shut down the engine for two seconds

after receiving a valid Remote Start request.
When To Reset Remote Start
The vehicle can be started remotely up to a maximum of

two times. The vehicle is also allowed a maximum of one

failed start, where the Remote Starting sequence was

initiated but the engine stopped cranking without start-

ing. After either of these conditions, or if the Vehicle

Security Alarm system is alarming, or if the PANIC

button was pressed, the vehicle must be reset by cycling

the START/STOP button to the ON/RUN position.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35

Advertising
This manual is related to the following products: