Vehicles without wheel covers – Chrysler 2015 Country - Owner Manual User Manual

Page 609

Advertising
background image

snapping the cover over the two lug nuts. Do not use

a hammer or excessive force to install the cover.

4. Install the remaining lug nuts with the cone shaped

end of the nut toward the wheel. Lightly tighten the

lug nuts.

WARNING!

To avoid the risk of forcing the vehicle off the jack,
do not tighten the wheel nuts fully until the vehicle
has been lowered. Failure to follow this warning may
result in personal injury.

5. Lower the vehicle to the ground by turning the jack

handle counterclockwise.

6. Refer to “Torque Specifications” in this section for

proper wheel lug nut torque.

7. After 25 miles (40 km) check the lug nut torque with a

torque wrench to ensure that all lug nuts are properly

seated against the wheel.

Vehicles Without Wheel Covers

1. Mount the road tire on the axle.
2. Install the remaining lug nuts with the cone shaped

end of the nut toward the wheel. Lightly tighten the

lug nuts.

WARNING!

To avoid the risk of forcing the vehicle off the jack,
do not tighten the wheel nuts fully until the vehicle
has been lowered. Failure to follow this warning may
result in personal injury.

3. Lower the vehicle to the ground by turning the jack

handle counterclockwise.

6

WHAT TO DO IN EMERGENCIES 607

Advertising
This manual is related to the following products: