Using fob with integrated key (tip start), Keyless enter-n-go™ — if equipped – Chrysler 2015 Country - Owner Manual User Manual

Page 472

Advertising
background image

CAUTION!

Damage to the transmission may occur if the follow-
ing precautions are not observed:
Do not shift from REVERSE, PARK, or NEUTRAL

into any forward gear when the engine is above
idle speed.

Shift into PARK only after the vehicle has come to

a complete stop.

Shift into or out of REVERSE only after the vehicle

has come to a complete stop and the engine is at
idle speed.

Before shifting into any gear, make sure your foot

is firmly on the brake pedal.

Using Fob With Integrated Key (Tip Start)

NOTE:

Normal starting of either a cold or a warm

engine is obtained without pumping or pressing the

accelerator pedal.

Do not

press the accelerator. Use the Fob with Integrated

Key to briefly place the ignition in the START position

and release it as soon as the starter engages. The starter

motor will continue to run, and it will disengage auto-

matically when the engine is running. If the engine fails

to start, the starter will disengage automatically in 10

seconds. If this occurs, place the ignition in the LOCK/

OFF position, wait 10 to 15 seconds, then repeat the

“Normal Starting” procedure.

Keyless Enter-N-Go™ — If Equipped

This feature allows the driver to oper-

ate the ignition switch with the push

of a button, as long as the ENGINE

START/STOP button is installed and

the Remote Start/Keyless Enter-N-

Go™ Key Fob is in the passenger

compartment.

470 STARTING AND OPERATING

Advertising
This manual is related to the following products: