Parksense® rear park assist — if equipped, Parksense® sensors, Parksense® warning display – Chrysler 2015 Country - Owner Manual User Manual

Page 251

Advertising
background image

PARKSENSE® REAR PARK ASSIST — IF
EQUIPPED

The ParkSense® Rear Park Assist system provides visual

and audible indications of the distance between the rear

fascia and a detected obstacle when backing up, e.g.

during a parking maneuver. Refer to “ParkSense® Sys-

tem Usage Precautions” in this section for limitations of

this system and recommendations.
ParkSense® will retain the last system state (enabled or

disabled) from the last ignition cycle when the ignition is

changed to the ON/RUN position.
ParkSense® can be active only when the shift lever is in

REVERSE. If ParkSense® is enabled at this shift lever

position, the system will remain active until the vehicle

speed is increased to approximately 7 mph (11 km/h) or

above. The system will become active again if the vehicle

speed is decreased to speeds less than approximately

6 mph (9 km/h).

ParkSense® Sensors

The four ParkSense® sensors, located in the rear fascia/

bumper, monitor the area behind the vehicle that is

within the sensors’ field of view. The sensors can detect

obstacles from approximately 12 in (30 cm) up to 79 in

(200 cm) from the rear fascia/bumper in the horizontal

direction, depending on the location, type and orienta-

tion of the obstacle.

ParkSense® Warning Display

The ParkSense® Warning screen will only be displayed if

Sound and Display is selected from the Customer-

Programmable Features section of the Electronic Vehicle

Information Center (EVIC). Refer to “Electronic Vehicle

Information Center (EVIC)/Personal Settings (Customer-

Programmable Features)” in “Understanding Your In-

strument Panel” for further information.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 249

Advertising
This manual is related to the following products: