Automatic transmission, Selection of lubricant – Chrysler 2015 Country - Owner Manual User Manual

Page 648

Advertising
background image

WARNING!

(Continued)

To avoid contamination from foreign matter or

moisture, use only new brake fluid or fluid that has
been in a tightly closed container. Keep the master
cylinder reservoir cap secured at all times. Brake
fluid in a open container absorbs moisture from the
air resulting in a lower boiling point. This may
cause it to boil unexpectedly during hard or pro-
longed braking, resulting in sudden brake failure.
This could result in a collision.

Overfilling the brake fluid reservoir can result in

spilling brake fluid on hot engine parts, causing
the brake fluid to catch fire. Brake fluid can also
damage painted and vinyl surfaces, care should be
taken to avoid its contact with these surfaces.

WARNING!

(Continued)

Do not allow petroleum based fluid to contaminate

the brake fluid. Brake seal components could be
damaged, causing partial or complete brake failure.
This could result in a collision.

Automatic Transmission

Selection Of Lubricant
It is important to use the proper transmission fluid to

ensure optimum transmission performance and life. Use

only the manufacturer’s specified transmission fluid.

Refer to “Fluids, Lubricants, and Genuine Parts” in this

section for fluid specifications. It is important to maintain

the transmission fluid at the correct level using the

recommended fluid. No chemical flushes should be used

in any transmission; only the approved lubricant should

be used.

646 MAINTAINING YOUR VEHICLE

Advertising
This manual is related to the following products: