Cabletron Systems SPECTRUM TRMMIM - Manual (Page 31)

Monitoring Hub Performance 2-15
Using the TRMMIM Hub View
Figure 2-7. Module Status Window
The Module Status window contains the following fields:
Module Name
This text field can help identify this module; the information entered here does
not appear anywhere else in the Hub View.
To edit the Module Name:
1. Highlight the text in the Module Name box and type in a new name.
2. Press Return on the keyboard to save your change.
Module
Indicates the index number of the module in the MMAC chassis. Module
numbers are counted from right to left in the chassis, with 1 being the rightmost
slot.
Speed Fault
Indicates whether a ring speed fault has been detected on the selected module.
Possible returned values are Fault Detected or No Fault Detected.
Note that if your module hardware does not support this feature, this field will be
grayed out.
Speed Fault Location
Indicates the last ring speed fault detection circuit(s) alerted by the fault. Possible
circuit locations are FNB, Ring-in, or Ring-out. Note that this field will only be
active if a fault has been detected.