Cabletron Systems SPECTRUM TRMMIM - Manual (Page 53)

Selecting a Ring to Map 3-3
Ring Map
Figure 3-1. The Ring Map – Ring Selection Window
Selecting a Ring to Map
The Ring Map Ring Selection window allows you to choose which ring to map
from among the rings, or networks, supported by the monitored TRMMIM.
Networks are identified by the following two fields:
No.
The index number assigned to the ring.
Ring Name
This network name assigned to each ring managed by the TRMMIM. The default
network name is Network X, where X represents the index number.
To view a ring map:
1. Click to select the ring you wish to monitor; the entry will be highlighted to
show it is selected.
2. Click on . The Ring Map window, Figure 3-2 , will appear.