Cabletron Systems SPECTRUM TRMMIM - Manual (Page 34)

Using the TRMMIM Hub View
2-18 Monitoring Hub Performance
2. Drag down to Station Status and release. The Station Status window,
Figure 2-9 , will appear.
Figure 2-9. The Station Status Window
Station Name
This text field can help identify the attached station; the information entered here
is not displayed anywhere else in the Hub View.
Module/Port
Indicates the module (board) and port index of the selected interface.
MAC Address
The physical (hardware) address of the station connected to the interface in MAC
(Ethernet) or Canonical (Token Ring) format.
Vendor
This field displays the name of the attached device’s manufacturer (if known), as
determined by the first three bytes of the MAC address.
Upstream Neighbor/Downstream Neighbor
These fields display the MAC addresses of the attached station’s neighbors on the
ring.