Cabletron Systems SPECTRUM TRMMIM - Manual (Page 93)

Viewing the Ring Station List 5-3
Statistics
Figure 5-2. Ring and Station Statistics Window
The Ring and Station Statistics window lists each active station on the ring; the
following information is provided for each station:
MAC Address
Displays the station’s MAC or hardware address. MAC addresses are usually
factory set and cannot be changed. (The MAC address will be displayed in Token
Ring format.)
Module and Port
Provides the station’s location in the MMAC chassis by module and port number.
If module and port equal 0, the station is not physically connected to the
monitored device (e.g., it is connected via a ring in or ring out port).
Vendor
Displays the name of the station’s manufacturer.
Stn Name
Displays the name assigned to the station.
Upstream Addr
Displays the MAC or physical address of the station’s nearest active upstream
neighbor (NAUN).
Downstream Addr
Displays the MAC or physical address of the station’s downstream neighbor.