Canon L380S User Manual
Page 105
Setting and Using the System Administrator’s ID and Password
9-3
Restr
icting the U
s
e o
f the Machine
9
3
Enter the current System Administrator’s password using the numeric keys
➞ press [OK] three times.
The password you entered is displayed with asteriscs.
The current password is displayed.
4
Open One-Touch Speed Dial panel.
5
Press [Clear] to cancel or change the System Administrator’s ID.
If you are canceling the System Administrator’s ID, press [OK]
➞ Proceed to step 7.
NOTE
When you cancel the System Administrator’s ID, the system password is also canceled.
6
Enter a new System Administrator’s ID and password of up to seven digits (from 1 to 9999999) using the
numeric keys
➞ press [OK].
For details about entering the System Administrator’s ID and password, refer to steps 5 to 7 of “Setting the
System Administrator’s ID and Password,” on p. 9-2.
The new password is displayed as you enter it.
7
Press [Stop/Reset] to return to standby mode.
S Y S . A D M I N . I D
1 2 3 4 5 6 7
➞
S Y S T E M S E T T I N G S
P A S S W O R D
S Y S . A D M I N . I N F O
2 . S Y S T E M P A S S W O R D
S Y S T E M P A S S W O R D
7 6 5 4 3 2 1
S Y S T E M S E T T I N G S
2 . D E P T . I D M A N A G E M N T
➞