Canon L380S - Manual (Page 112)

Restricting Machine Operation (Department ID Management) 9-10
Restr
icting the U
s
e o
f the Machine
9
NOTE
If you have not set the TX limit, nothing will be displayed as “Limit.” (See “Setting Operation Restrictions,” on p.
9-4.)
❑
Press [ (-)] or [ (+)] to scroll through the Department IDs.
7
To reset the counter, press [Menu] twice ➞ press [ (-)] or [ (+)] until <2.COUNT RESET> appears ➞
press [OK].
8
Press [ (-)] or [ (+)] to display <ON> or <OFF> ➞ press [OK].
To reset the counter, select <1.ON>.
If you do not want to reset the counter, select <OFF>.
9
Press [Stop/Reset] to return to standby mode.
C O U N T R E S E T
1 . O N