Canon L380S - Manual (Page 34)

Energy Saver Mode 2-16
Setting Up Y
o
u
r Machine
2
Energy Saver Mode
The machine provides an energy saver function. When no operations are performed for about 5
minutes, the machine automatically enters the energy saver mode.
NOTE
•
The time until the machine enters the energy saver mode can be specified in a range of 3 minutes to 30 minutes.
You can also turn off the energy saver function. (See Chapter 16, “The Menu System.”)
•
The energy saver function does not activate when the machine is in the following status:
- When printing out copies, faxes or other pages
- When sending or receiving faxes
- While a copy job is saved in memory or when the reserve copy or other functions are operating, or when the In
Use/Memory indicator lights up
- When paper jams occur
- When an error code appears and the Alarm indicator flashes
- When no paper is loaded in the cassette
Setting the Energy Saver Mode Manually
1
Press [Energy Saver].
The LCD is turned off and [Energy Saver] lights up.
NOTE
Right after the machine is restored from the energy saver mode, or right after copying finishes, wait about 2
seconds before pressing [Energy Saver].
Restoring from the Energy Saver Mode
1
Press [Energy Saver].
[Energy Saver] goes off and the machine enters standby mode.
NOTE
The machine can be restored from the energy saver mode immediately. However, it may vary according to room
temperature and circumstances.