Canon L380S - Manual (Page 54)

Loading Paper 4-7
P
aper Ha
ndling
4
7
Load the envelopes with the print side down and the right edge (i.e., closer to the stamp) first.
If the envelope to be loaded has a flap on the short edge, this edge must enter the machine first. Not loading it
this way will result in a paper jam.
8
Pinch and slide the width slide guides to fit the envelopes.
Make sure the envelopes do not exceed the load limit mark.
9
Insert the cassette into the machine.
NOTE
If you do not completely insert the cassette into the machine, paper jams may occur.
10
Specify the paper size and type.
❑
Press [Menu] ➞ [OK].
❑
Press [ (-)] or [ (+)] to select <1.CASSETTE> ➞ press [OK] twice.
❑ Press [ (-)] or [ (+)] to select <ENVELOPE> ➞ press [OK].
❑
Press [ (-)] or [ (+)] to select the appropriate envelope type ➞ press [OK] twice.
❑
Press [ (-)] or [ (+)] to select <HEAVY PAPER> or <HEAVY PAPER H> ➞ press [OK].
❑ Press [Stop/Reset] to return to standby mode.
HOOKS
LOAD LIMIT
MARK
HOOK
HOOK