Canon L380S - Manual (Page 130)

CHAPTER
Checking the Status of Copy, Fax, Print and Report Jobs 12-1
12
System Monitor
Checking the Status of Copy, Fax, Print and
Report Jobs
Use [System Monitor] to confirm and delete the jobs.
When using [System Monitor], the LCD displays the jobs in the following order in each mode.
In Copy mode, In Fax mode,
- COPY STATUS - FAX MONITOR
- FAX MONITOR - COPY STATUS
- PRINT STATUS - PRINT STATUS
- REPORT STATUS - REPORT STATUS
Confirming Transmission Status
Follow the procedure below to confirm the sending or receiving status.
1
Press [System Monitor] repeatedly until <FAX MONITOR> is displayed ➞ press [OK].
NOTE
•
To return to standby mode, press [Stop/Reset].
•
If you perform the procedure above when the machine is not sending or receiving faxes, <NO CURRENT RX/TX
JOB> appears, and the display returns to the display shown in step 1.
•
The transaction number and <TX/RX> in the LCD mean the following:
- <0001> to <4999>: A sent document (TX)
- <5001> to <9999>: A received document (RX)
➞
F A X M O N I T O R
1 . R X / T X S T A T U S 1 6 : 5 0 0 0 5 6 T X
1 2 3 x x x x