Canon L380S - Manual (Page 174)

CHAPTER
Cleaning the Machine 15-1
15
Maintaining Your Machine
Your machine requires no maintenance other than periodic cleaning, and replacing of the toner cartridge as needed.
Cleaning the Machine
Clean your machine regularly to keep it in good operating condition.
NOTE
Follow these precautions whenever you clean the machine:
- When cleaning the machine’s exterior or the scanning glass, be sure to disconnect the power cord before
cleaning the machine.
- When the power cord is disconnected, any documents stored in memory will be erased if you leave the machine
unplugged for 1 hour or more. Be sure to plug the machine in after cleaning to avoid this happening. If
<RECEIVED IN MEMORY> appears in the LCD display, follow steps on p. 7-6 to print out the document.
- If you disconnect the machine while it is waiting to send a document, you will have to set the machine to send
your document again once you finish cleaning the machine. However, when you have set a document for
delayed transmission, the machine holds the document in its memory for about 1 hour.
- Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick to the components or
generate static charges.
- Never use volatile liquids such as thinner, benzene, acetone, or any other chemical cleaner to clean the interior
of the machine; these can damage the machine’s components.