Futaba 4GWD - Manual (Page 12)

13
Bef
ore Using
Digital Trim Operation (DT1/DT2/DT3/DT4)
Push the lever to the left or right (up or down).
The current position is displayed on the LCD screen for about three seconds when
each digital trim is operated.
Steering trim
position
Throttle trim
position
- Each step is indicated by a tone.
- When the trim exceeds the maximum trim adjustment range, the tone will change
pitch and the lever will not move any farther.
Trim Operation
With the digital trim feature, trim adjustments have no effect on the maximum
servo travel. This prevents the linkages from binding when adjustments are made.
Aux. ch trim
position
Shift trim
position
DT4 DT1
DT2 DT3