Futaba 4GWD - Manual (Page 24)

25
Functions
Steering (EPA) adjustment
(Preparation)
- Select setup item "C1" and make the following adjustments:
1
Steering (left side) adjustment
Turn the steering stick fully to the left and use the (+) and (-) buttons to
adjust the steering angle.
2
Steering (right side) adjustment
Turn the steering stick fully to the right and use the (+) and (-) buttons to
adjust the steering angle.
3
When adjusting the EPA of another channel immediately after this, select
the setup item ("C2", "C3" or "C4") and then adjust the operation amount.
When ending adjustment, return to the initial screen by pressing the (SEL)
button.
Throttle (EPA) adjustment
(Preparation)
- Select setup item "C2" and make the following adjustments:
1
Throttle (forward side) adjustment
Push the throttle stick fully to the high side and use the (+) and (-) buttons
to adjust the operation amount. However, when using an ESC, set to
100%.
2
Throttle (brake side/reverse side) adjustment
Pull the throttle stick fully to the brake side and use the (+) and (-) buttons
to adjust the operation amount. However, when using an ESC, set to
100%.
3
When adjusting the EPA of another channel immediately after this, select
the setup item ("C1", "C3" or "C4") and then adjust the operation amount.
When ending adjustment, return to the initial screen by pressing the (SEL)
button.
Repeat this procedure for the end point settings on the other channel
remaining ("C3" and "C4".)