Futaba 4GWD - Manual (Page 32)

33
Ref
erence
Reference
Ratings
*Specifications and ratings are subject to change without prior notice.
Transmitter T4GWD
(2 Stick system, 4 channels)
- Transmitting frequencies: 27, 29,
40, 41 or 75MHz band
- Modulation: AM
- Power requirement:
(Dry cell battery)
Penlight x 8 (12V)
(NiCd battery)
NT8F700B NiCd battery (9.6V)
- Current drain: 250mA or less
Receiver R124H
(4 channels, AM receiver)
- Receiving frequencies: 27, 29, 40,
41 or 75MHz band
- Intermediate frequency: 455kHz
- Power requirement:
4.8 or 6.0V (shared with servos)
- Current drain: 5mA (at 4.8V)
- Size: 25.6x37.7x15.3mm
(1.00x1.48x0.60in.)
- Weight: 14.8g (0.52oz.)
Servo S3003
(standard servo)
- Power requirement: 6V
(common with receiver)
- Current drain: 8mA (at 6V / Idle)
- Output torque: 4.1kg-cm (57in.-oz.)
at 6V
- Operating speed: 0.19sec/60 degree
at 6V
- Size: 40.4x19.8x36mm
(1.59x0.78x1.42in.)
- Weight: 37.2g (1.31oz.)
E.S.C. MC230CR
(Electronic speed control)
- Operating system: Forward, reverse,
and brake operations are all linear.
- Power requirement: Nicd battery
6-7 cells (7.2 to 8.4V)
3:0IUHTXHQF\ N+] ¿[HG
- S e t t i n g : O n e - t o u c h i n p u t b y
pushbutton switch. Set data is
saved to built-in EEPROM.
- Current capacity (FET rating):
Forward=90A, reverse=45A
- Size: 27.1x33.3x12.8mm
(1.07x1.31x0.50in.)
(excluding protruding parts)
- Silicon cord gauge size:
AWG16 equivalent
- Weight: 44g (1.55oz.)
(including connectors and switches)
- BEC voltage: 6.0V