Futaba 4GWD - Manual (Page 25)

26
Functions
࠮ࡦ࠲࡯ࠍ಴ߔߚ߼a
ߦ૶↪ߔࠆa
Subtrim / SBT
Use this function to adjust the neutral position of the
steering, throttle, channel 3 and shift servos.
Subtrim shifts the entire servo travel range in the set direc-
tion.
Use to adjust the neutral position
Subtrim adjustment
(Preparation)
-Set the steering, throttle, channel 3, and shift digital trims to the neutral "0"
position.
- Preselect setup channel "C1", "C2", "C3" or "C4".
1
(Subtrim adjustment)
Use the (+) or (-) button to adjust the center.
(Each channel can be set similarly.)
2
When ending adjustment, return to the initial screen by pressing the (SEL)
button.
(Initial screen)
Press "SEL" key to select the
desired function screen.
Calling the setup screen
(Setup screen)
Press "CH" key to select the next set-
up screen.
[Setup Item]
SBT-C1 : Steering
SBT-C2 : Throttle
SBT-C3 : Channel 3
SBT-C4 : Shift [Subtrim position]
-100%(L.F.U) ~ 0 ~ +100%(R.B.D)
Initial value: 0%
[Adjustment buttons]
- Use the (+) and (-) buttons to make
adjustments.
- P r e s s t h e ( + ) a n d ( - ) bu t t o n s
simultaneously (approx. 1 sec) to
return to the initial screen.