Haltech E6K - Manual (Page 70)

64
If you wish to use an external 1 Bar MAP Sensor (left open to atmosphere) then connect this
sensor to the Spare A/D input on the wiring loom and select “external” in the Baro Input as
follows:
Completing Method 1
The E6K software contains a barometric compensation map that allows the fuel delivery to be
reduced as the barometric pressure falls. As a final step to complete Method 1, you have the
ability to adjust a dedicated barometric correction map. The fuel can be trimmed
±
50%. When
sensing load via Throttle Position Mode, the Barometric Correction Map should look
something like the following: