Haltech E6K - Manual (Page 86)

80
interested in. In the case of selecting the PWM Outputs, use
© © © ©
to cycle through the
functions, and press
¬ ¬ ¬ ¬
to select the one you want.
A keystroke guide is available at the bottom of the screen. Further, a simple Help window
may be opened by pressing
¦H ¦H ¦H ¦H
. This will describe the function you are currently looking
at, and offer some explanation as to how its parameters are to be used. For more detail on
PWM options see chapter 16
13.4 Enabling Options
Every option has an Enable flag at the top of its window. Toggling this flag allows you to
switch that option on and off. The settings for an option that is switched off will not change
when you switch it back on later. When a map is loaded from disk, output functions that do
not match what is in the ECU are automatically disabled. After loading a map, return to the
Output Options Page and check the functions you want enabled.
Any change you make in the Options page will not affect the ECU unless you are ONLINE. If
you are making changes OFFLINE, then be sure to save your data to disk so that it may be
later up-loaded.