IC Realtime 4 Channel PoE Mobile Network Video Recorder - Manual (Page 127)

118
Parameter Function
PTZ
activation Here you can set PTZ movement when alarm occurs. Such as go to
preset x when there is an alarm.
The PTZ configuration events include preset, tour, and pattern.
Capture You need to input capture channel number so that system can backup
snapshot file when an alarm occurs.
Copy It is a shortcut menu button. You can copy current channel setup to
one or more (all) channels.
6.4.2.1 Detect
By analyzing video image, system will boot video detection alarm when it senses the motion
signal which meets the senility standard that is previously set. See Figure 6-42.
Figure 6-42 Detect
Please refer to the following sheet for detailed information.
Parameter Function
Event type Motion detect, video loss and video masking
Channel
Select a channel from the dropdown list to set motion detect, video loss and video
masking function.
Sensitivity System supports 6 levels. The sixth level has the highest sensitivity.
Enable button Check the box to enable this function.
Region
There are PAL22X18/NTSC22X15 small zones.
Blue area is the detection zone. Right click to view in full screen, click OK
before exit to save the setup.