IC Realtime 4 Channel PoE Mobile Network Video Recorder - Manual (Page 93)

84
Select backup device and then set channel, file start time and end time.
Click add button, system begins search. All matched files are listed below. System
automatically calculates the capacity needed and remained. See Figure 4-100.
Figure 4-100
System only backup files with a √ before channel name. You can use AUX button to check
or cancel file.
Click backup button, you can backup selected files. There is a process bar for you reference.
See Figure 4-101. Click backup button, system begins burning. At the same time, the backup
button becomes stop button. You can view the remaining time and process bar at the left
bottom.
Figure 4-101
When the system completes backup, you can see a dialogue box prompting successful
backup.
The file name format usually is: SN_CH+channel number+Time. In the file name, the YDM
format is Y+M+D+H+M+S. File extension name is .dav.
Tips:
During backup process, you can click ESC to exit current interface for other operation. The
system will not terminate backup process.
Note:
When you click stop button during the burning process, the stop function becomes activated
immediately. For example, if there are ten files, when you click stop system just backup five
files, system only save the previous 5 files in the device (But you can view ten file names).