IC Realtime 4 Channel PoE Mobile Network Video Recorder - Manual (Page 133)

124
Parameter Function
Alarm output There are three alarm output channels.
Please click the corresponding number and then click the trigger
button.
Trigger Enable/disable alarm output.
Please note once you activate an alarm manually, you need to
click the output channel number again and then click trigger button
to disable it. Otherwise the alarm can not be cancelled.
Refresh Search alarm output status.
6.4.3.4 Record
Record control interface is shown as in Figure 6-49.
The bit stream type includes main stream and extra stream.
Figure 6-49 Record
Please refer to the following sheet for detailed information.
Parameter Function
Schedule System enables auto record function as you set in schedule setup
(chapter 6.4.2.3).
Manual
Enable corresponding channel to record no matter what period
applied in the record setup.
Stop
Stop current channel record no matter what period applied in the
record setup.
6.4.3.5 Account
Here you can add, remove user or modify password. See Figure 6-50.