IC Realtime 4 Channel PoE Mobile Network Video Recorder User Manual
Page 67
58
begins the alarm record instead of the MD record if the local alarm and MD event
occurred at the same time.
Tour: Here you can enable tour function when an alarm occurs. System supports 1/8-window
tour. Please go to chapter 4.7.9 Display for tour interval setup. Please note the tour setup
here has higher priority than the tour setup you set in the Display interface. Once there two
tours are both enabled, system can enable the alarm tour as you set here when an alarm
occurred. If there is no alarm, system implements the tour setup in the Display interface.
Snapshot: You can enable this function to snapshoot image when an alarm occurs.
Buzzer: Highlight the icon to enable this function. The buzzer beeps when an alarm occurs.
Please highlight icon
to select the corresponding function. After setting all the setups
please click save button, system goes back to the previous menu.
Figure 4-54
Figure 4-55