Chapter 2 camera configuration, Configuration – Interlogix TruVision IP Open Standards Outdoor Cameras Configuration Manual User Manual
Page 10
TruVision IP Camera Configuration Manual
8
Chapter 2
Camera configuration
This chapter explains how to configure the cameras through a web browser.
Once the camera hardware has been installed, configure the camera’s settings
through the web browser. You must have administrator rights in order to
configure the cameras over the internet.
The camera web browser lets you configure the camera remotely using your PC.
Web browser options may vary depending on camera model. The camera is
configured using on-screen display (OSD) menus, which are in English only.
There are two main folders in the configuration panel:
Local configuration
Configuration
Configuration
Use the
Configuration
panel to configure the server, network, camera, alarms,
users, transactions and other parameters such as upgrading the firmware. See
Figure 2 and Table 2 below for descriptions of the configuration folders available.