Interlogix TruVision IP Open Standards Outdoor Cameras Configuration Manual - Manual (Page 19)

1BChapter 2: Camera operation
TruVision IP Camera Configuration Manual 17
Parameter Description
Max bit rate Specifies the maximum allowed bit rate. A high image resolution
requires that a high bit rate must also be selected.
Options include: 32, 48, 64, 80, 96, 128, 160, 192, 224, 256, 320, 384,
448, 512, 640, 768, 896, 1024, 1536, 1792, 2048, 3072, 4096, 8192,
16384 and Custom (enter a value manually).
Note: SD camera and sub stream of all models only support up to
8192Kbps.
Video Encoding Specifies the video encoder used. Main stream support H.264 and
MPEG4. When H.264 is selected, H.264 and MJPEG are optional for
sub stream. When MPEG4 is selected, MPEG4 and MJPEG are
optional for sub stream.
Profile Different profile indicates different tools and technologies used in
compression. For main stream, options include: High Profile, Main
Profile and Basic Profile. For sub stream, options include: Main Profile
and Basic Profile.
I-frame Interval A video compression method. It is strongly recommended not to change
the default value displayed: 25.
Audio Encoding G.711 ulaw, G.711alaw and G.726 are optional.
Configuring the video image
You may need to adjust the camera image depending on the camera model or
location background in order to get the best image quality. You can adjust the
brightness, contrast, saturation, hue, and sharpness of the video image. See
Figure 7 below.
Use this menu to also adjust camera behavior parameters such as exposure
time, iris mode, video standard, day/night mode, image flip, WDR, digital noise
reduction, white balance, and indoor/outdoor mode. See Figure 7 and Table 6
below for more information.