Rebooting the camera – Interlogix TruVision IP Open Standards Outdoor Cameras Configuration Manual User Manual
Page 39
2BChapter 3: Camera operation
TruVision IP Camera Configuration Manual
37
To upgrade the firmware through the web browser:
1. Download on to your computer the latest firmware from our web site at:
www.interlogix.com/video/product/truvision-ip-open-standards-outdoor-
cameras/
- Or -
www.utcfssecurityproductspages.eu/videoupgrades/
2. In the
Configuration
folder, select the subfolder
System
.
3. Select the
Maintenance
tab.
4. Click the
Browse
button to locate the latest digicap.DAV file on your
computer.
5. Click
Update
. You will receive a prompt asking you to reboot the camera.
Rebooting the camera
The camera can be easily rebooted remotely.
To reboot the camera through the web browser:
1. In the
Configuration
folder select the subfolder
System
.
2. Select the
Maintenance
tab.
3. Click the
Reboot
button to reboot the device.
4. Click
OK
in the pop-up message box to confirm reboot operation.