Interlogix TruVision IP Open Standards Outdoor Cameras Configuration Manual - Manual (Page 23)

1BChapter 2: Camera operation
TruVision IP Camera Configuration Manual 21
8. Click Save to save changes.
Note:
1. If you set the display mode as transparent, the text varies according the
scenery. With some sceneries, the text may be not clear.
2. When you enable motion detection, it is recommended not to select the
flashing option as the overlay text may trigger a motion alarm.
Adding extra overlay text
You can add up to four lines of text on screen. This option can be used, for
example, to display emergency contact details. Each text line can be positioned
anywhere on screen. See Figure 9 below.
Figure 9: Text overlay menu
To add on-screen text:
1. In the Image folder, click the Text Overlay subfolder to open its window.
2. Check the box for the first line of text.
3. Enter the text in the text box.
4. Use the mouse to click and drag the red text in the live view window to adjust
the text overlay position.
5. Repeat steps 2 to 4 for each extra line of text, selecting the next string
number.
6. Click Save to save changes.