Interlogix TruVision IP Open Standards Outdoor Cameras Configuration Manual - Manual (Page 20)

1BChapter 2: Camera operation
18 TruVision IP Camera Configuration Manual
Figure 7: Camera image settings menu
Table 6: Image parameters
Parameter Description
Brightness, Contrast
Saturation, Hue,
Sharpness Modifies the different elements of picture quality by adjusting the
position of the values for each of parameter.
Exposure Time The exposure time controls the length of time that the aperture is open
to let light into the camera through the lens.
Select a higher value if the image is dark and a lower value to see fast
moving object.
Iris Mode There are two settings, Auto and Manual. The type of lens determines
which setting is used.
Video Standard The camera cannot auto-sense the power supply.
Select 50 Hz (PAL) or 60 Hz (NTSC) depending on your region.
Day/Night Switch Defines whether the camera is in day or night mode. The day (color)
option could be used, for example, if the camera is located indoors
where light levels are always good.
Options:
Day: Camera is always in day mode.
Night: Camera is always in night mode.
Auto: The camera automatically detects which mode to use. Default is
Auto.
Sensitivity Adjusts the sensitivity of the camera from night to day.
Options: Low, Normal or High. Default is Normal.
Switch Time Adjusts the delay time of day/night switch.