Interlogix TruVision NVR 10 User Manual - Manual (Page 127)

TruVision NVR 10 User Manual 121
Chapter 16
Using the web browser
This chapter describes how you can use the web browser interface to configure the
device, play back recorded video, search through event logs, and control a PTZ dome
camera. You can also specify settings on the web browser interface to optimize video
playback and recording performance when operating in a low or limited bandwidth
environment.
Windows Vista and 7 users
Internet Explorer for Windows Vista and Windows 7 operating systems have increased
security measures to protect your PC from any malicious software being installed.
When using the NVR web browser interface, you can install ActiveX controls to connect
and view video using Internet Explorer.
To have complete functionality of the web browser interface and the NVR player with
Windows Vista and Windows 7, do the following:
• Run the Browser interface and the NVR player application as an administrator in
your workstation
• Add the NVR’s IP address to your browser’s list of trusted sites
To add the NVR’s IP address to Internet Explorer’s list of trusted sites:
1. Open Internet Explorer.
2. Click Tools , and then Internet Options .
3. Click the Security tab, and then select the Trusted Sites icon.
4. Click Sites .
5. Clear the “Require server verification (https:) for all sites in this zone” box.
6. Enter the IP address or DDNS name in the “Add this website to the zone” field.
7. Click Add , and then click Close .
8. Click OK in the Internet Options dialog window.
9. Connect to the TVN 10 for full browser functionality.