Interlogix TruVision NVR 10 User Manual - Manual (Page 89)

TruVision NVR 10 User Manual 83
Chapter 11
Controlling a PTZ camera
You can control PTZ dome cameras using the buttons on the front panel, the keypad,
and IR remote control as well as using the PTZ control panel accessed with the mouse.
Access to PTZ commands may require a password.
Calling up presets, tours and shadow tours
When in live view you can quickly call up the list of existing presets, preset tours, and
shadow tours by using the front panel, remote control, mouse, and keypad.
Front panel Press Enter. PTZ control panel appears.
Mouse Left-click the mouse on the desired camera image. The quick access toolbar
appears. Click the PTZ control icon to enter PTZ mode. The PTZ control panel
appears.
Remote control Press the OK button. The PTZ control panel appears.
Keypad Press the Enter button on the keypad. Refer to the keypad user manual for
further information.
If the display is in multiview format, it changes to full-screen format for the selected
camera. See Figure 23 below for a description of the PTZ control panel.