Interlogix TruVision NVR 10 User Manual - Manual (Page 15)

TruVision NVR 10 User Manual 9
Chapter 3
Getting started
Turning on and off the NVR
Before starting the power up process, connect the monitor to the VGA/HDMI interface.
Otherwise, you will not be able to see the user interface and operate the device.
The NVR auto-detects the video mode (PAL or NTSC) on startup.
The TVN1004c, TVN1008, and TVN1016 equipped with an external 12 VDC. The
TVN1004cS equipped with an external 48 VDC. The TVN1008S and TVN1016S
equipped with a universal power supply that will auto-sense 100/240 V, 60/50 Hz.
Note: It is recommended that an uninterruptible power supply (UPS) is used in
conjunction with the device.
To turn on the NVR:
Turn on the NVR using the power switch on the back panel. The power LED
illuminates. A splash screen appears indicating that the NVR is starting up.
The Start Up Wizard window will appear.
To turn off the NVR:
1. In live view mode, right-click the mouse and click Menu . The main menu window
appears.
2. Select the Power Manager icon.
3. In the Shutdown popup menu, select Shutdown . Click Yes to confirm shutdown.
To reboot the NVR:
1. In live view mode, right-click the mouse and click Menu . The main menu window
appears.
2. Select the Power Manager icon.
3. In the Shutdown popup menu, select Reboot . Click Yes to confirm reboot.