Chapter 7 network settings, General network settings – Interlogix TruVision NVR 10 User Manual User Manual
Page 51
Advertising
TruVision NVR 10 User Manual
45
Chapter 7
Network settings
You must configure your NVR’s network settings before using it over the network.
The NVR must have access to the internet when configuring the network settings.
Note:
As every network configuration may differ, please contact your Network
Administrator or ISP to see if your NVR requires specific IP addresses or port numbers.
General network settings
To configure general network settings:
1. From the menu toolbar, click
Network Settings
>
General
.
2. Enter the required settings:
Advertising