Interlogix DVR 60 User Manual - Manual (Page 105)

TruVision DVR 60 User Manual 99
Chapter 13
Configuring network
settings
You must configure your DVR’s network settings before using your DVR over the
network.
Note:
As every network configuration may differ, please contact your Network
Administrator or ISP to see if your DVR requires specific IP addresses or port
numbers.
Configuring basic network settings
To configure basic network settings:
1. Enter the Network Settings screen by selecting Network in the main menu.
2. Click the General tab.
3. If you have a DHCP server running and want your DVR to automatically
obtain an IP address and other network settings from that server, check the
DHCP box. You can check the DHCP status by going to the Network Status
tab.
4. To configure your own settings, enter the settings for:
• IP Address: The IP address you want to use for your DVR.