Interlogix DVR 60 User Manual - Manual (Page 80)

9BChapter 10: Using the Web browser
74 TruVision DVR 60 User Manual
Using the Web browser to configure the
device
Click Config on the menu bar to display the configuration screen. There are two
ways to configure the DVR: Local and Remote.
Local configuration
Local configuration lets you define communication and network parameters such
as protocol type, maximum file size, stream type, network transmission settings.
You can also specify the directory locations for saving recorded and playback
video, captured images, and downloaded files.
Remote configuration
Remote configuration lets you remotely configure the following DVR settings:
Note:
The configuration settings defined remotely are different from those that
can be defined locally.
Figure 32: Remote browser configuration screen (Video parameters shown)
Caution : You can adjust the frame type and I-frame ratio of the camera
streaming configuration (see the boxed area in Figure 32). However, these
settings have a direct impact on the recorded video quality and streaming
behavior. Changing the factory default settings can result in loss of streaming
performance and poor video quality. It is strongly recommended that the factory
default values are not changed.
• DVR information including device name, number, and display scale