Interlogix DVR 60 User Manual - Manual (Page 45)

TruVision DVR 60 User Manual 39
Chapter 6
Configuring the live mode
display
This chapter describes how to configure the on-screen image in live mode as
well as set up the DVR name and address, enable password protection, and set
up the system time and date.
You can change the settings in the screens in any order. They are described in
the following sections.
Configuring monitor and DVR options
Use this screen to configure the monitor image as well as to configure the DVR
name and address. See Figure 17 below.
The TVR 60 can support NTSC or PAL video output. The video format is auto
detected.
The VGA monitor is the main monitor by default and the spot monitor is monitor
C. When no VGA monitor is connected, the main monitor then becomes monitor
B.
Figure 17: Monitor setup screen