Interlogix DVR 60 User Manual - Manual (Page 112)

13BChapter 14: Camera management
106 TruVision DVR 60 User Manual
Figure 38: Camera management screen
Enabling or disabling analog cameras
When you turn on the DVR the status of all 16 IP cameras is automatically on
and all the cameras are recording, even if there are not 16 analog cameras
connected. You can disable the unused camera links in order to save space on
the hard drive.
You may also need to disable analog cameras in order to be able to add more IP
cameras to the system. You need to disable one analog camera to add one 4CIF
IP camera, and to disable two analog cameras to add one 720p IP camera.
To enable or disable analog cameras:
1. Enter the Camera Management screen by clicking Camera in the main menu.
2. Determine the number of analog cameras to disable.
3. Click the
Status
button to enter the Analog Camera Status menu.
4. Clear the check boxes of the cameras you want to disable.
5. Click
OK
to save your settings.
A confirmation message appears on the screen prompting you to reboot the
DVR. Click
Yes
to reboot.